Skip to content
ExtraCreditLENDING MADE SIMPLE

Hydro Jetter and Sewer Camera Financing for Plumbers

Hydro jetter financing is an equipment loan that pays for a trailer-mounted sewer jetter and the inspection camera that goes with it, with the equipment itself as collateral, repaid in fixed monthly payments over up to 72 months. Through our lending partners, a qualified plumbing contractor can finance up to 100% of the cost, from $20,000 up, with a decision in as little as 24 hours. A $57,000 jetter and camera bundle over 60 months at 7.5% runs about $1,142 a month.

Reviewed by Josh Jones, in small business lending since 2010 · Updated

The numbers

Cold water trailer jetter, 10 GPM at 4,000 PSI
$39,995
Hot water trailer jetter
$52,995 to $79,995
18 GPM diesel trailer jetter, dealer listing
$92,000
Sewer camera reel and monitor
$14,826
Share of cost financed
Up to 100%
Term
Up to 72 months
Rate
From 7.5%
Decision
As little as 24 hours
Minimums
2 years, 660 credit; lower with some lenders

Jetter prices are Hot Jet USA's published prices from its 2026 buying guide (updated May 2026) and a dealer listing on Truck Paper (checked November 7, 2026). Camera and locator prices are Pollardwater's listed prices for RIDGID SeeSnake and SeekTech equipment, checked November 3, 2026. Financing terms are what our primary lending partner publishes for equipment financing, checked October 12, 2026; the lower minimums are what other equipment lenders in our marketplace publish, checked November 6, 2026. Depending on the deal, your financing may be placed with one of our bank partners or with an alternative lender. Your rate depends on the amount, your credit, and the company's finances.

What a jetter and camera cost

For a plumbing contractor adding drain and sewer work, the usual buy is a trailer-mounted jetter plus an inspection camera and a locator to find what the camera sees. Hot Jet USA, a jetter manufacturer, publishes its 2026 prices:

Jetter What it does Price
XtremeFlow II, cold water, 10 GPM at 4,000 PSI Residential and small commercial lines, 2 to 6 inches $39,995
HotJet II, hot water, single axle, 10 GPM at 4,000 PSI The same lines plus grease $52,995
HotJet II Diesel Hot water with a diesel engine $79,995
HotJet III, dual engine, 18 GPM at 4,000 PSI Municipal mains and large commercial $79,995

The same guide puts truck-mounted combination units at $300,000 and up, and warns that the $8,000 to $15,000 jetters sold online are not built for daily contractor use. A dealer listing on Truck Paper gives a second point: Vacuum Sales Inc of Lindenwold, New Jersey, lists a new 2026 Harben DTH 375 E180 trailer jetter, 18 GPM at 4,000 PSI on a 49 horsepower Hatz diesel with a 375 gallon tank, at $92,000 before tax. That is the same 18 GPM class, priced above Hot Jet’s figure.

The camera is a separate line on the quote. Pollardwater, a Ferguson supply house, lists the RIDGID SeeSnake rM200A 200 foot reel with a self-leveling camera at $10,899.30 and the CS6x Versa recording monitor with battery and charger at $3,926.56, which is $14,826 for the system. A RIDGID NaviTrack Scout locator is $2,001.87 and the SeekTech SR-24 receiver is $4,513.74.

The loan covers what is on the dealer’s invoice: the jetter and trailer, hose and nozzles that ship with it, the camera, monitor, and locator when the seller quotes them. Training, insurance, the truck that tows the trailer, and the nozzles you buy later are not on the invoice and are not part of the loan.

What the payment looks like

Take the entry bundle: the cold water trailer jetter at $39,995, the SeeSnake reel at $10,899.30, the CS6x monitor at $3,926.56, and the NaviTrack Scout at $2,001.87, which is $56,823 of equipment. Call it $57,000, financed in full at 7.5%, the published starting rate:

Term Monthly payment Total paid Interest
60 months $1,142 $68,530 $11,530
72 months $986 $70,959 $13,959

The longer term costs $2,429 more in interest and lowers the payment by $157 a month. Pick the term by cash flow, not by the interest total; the loan has no prepayment penalty, so you can pay the 72-month loan off on a 60-month schedule after a busy winter.

Hot Jet USA’s own figure for a cold water jetting job is $400 to $900, against $200 to $400 for snaking the same line. At the low end, three jetting jobs a month cover the 60-month payment; at $900, two do. Those are the maker’s example figures, not a market rate for your area, and the camera inspection bills separately.

Who qualifies

Equipment financing is the easiest product to qualify for in our marketplace, because the jetter and camera secure the loan. Our primary lending partner publishes 2 years in business, a 660 credit score, and application-only approvals up to $500,000, which covers any trailer jetter and camera bundle with room for a second truck. Other lenders in our marketplace have programs for newer businesses, including startups, and some look at scores in the mid-500s.

Three things decide the rate: the amount financed, the owner’s personal credit, and the company’s deposits. Plumbers show well here, because the bank statements carry many service calls from many customers. Existing truck and equipment payments count against what you can carry, so list them. The Bureau of Labor Statistics projects plumber jobs to grow 7% from 2025 to 2035, which lenders read as demand that will still be there at the end of a 72-month loan.

A jetter does not fix the wait on a general contractor’s check or on retainage. The equipment payment is fixed every month; the wait is carried by invoice factoring on completed, invoiced work owed by a creditworthy business, or by a line of credit. Do not stretch the equipment term to cover it.

Loan or lease

Buy it. A trailer jetter and a camera system are 5 to 8 year assets when the pump is serviced and the push cable is replaced as it wears, so a 60-month loan ends with the company owning equipment that still has years of work in it. A 72-month loan on the camera alone would outrun the camera, which is one more reason to keep it inside the jetter bundle. A lease gives a lower payment and a purchase option, which fits a contractor who runs the jetter for part of the year or plans to step up to a truck-mounted unit in three or four years. Our primary lending partner offers leasing only when the vendor allows it.

Section 179 of the tax code may let the company deduct some or all of the cost in the year the equipment is financed. Confirm with your accountant before you count on it.

How to apply

  1. Get the dealer’s written quote on the complete package: jetter, trailer, hose and nozzles, camera, monitor, and locator. If the camera comes from a different seller, get that quote too.
  2. Have three months of business bank statements ready, plus the owner’s ID.
  3. Tell us about the company and the quote. We match the file to the lender with the best fit.
  4. Decision in as little as 24 hours. The lender pays the dealer, and the company makes fixed monthly payments.

If the quote includes costs the equipment lender will not finance, working capital financing covers them so the trailer is working the week it lands.

Sources

Common questions

Can the jetter, the camera, and the locator go on one loan?

Yes, when they are on the quote. A camera reel and monitor at about $14,826 is under the $20,000 minimum on its own, so it goes in the bundle with the jetter or on a term loan. If the jetter comes from one seller and the camera from another, get both quotes before you apply, and the lender pays each one.

Can I finance a used trailer jetter?

Yes. Our lending partners finance new and used equipment bought from a licensed dealer. Expect a condition report and a shorter term on an older unit, so the loan ends before the pump does.

Hot water or cold water?

Hot Jet USA, a jetter maker, puts a cold water trailer unit at $39,995 and a hot water unit from $52,995, and says hot water work bills more per job: $1,200 to $2,500 against $400 to $900 for cold water, by its own figures. Grease lines in restaurants are the usual reason to pay the difference. The payment gap between the two is about $260 a month over 60 months at 7.5%.

How fast can a jetter loan be approved?

Our primary lending partner publishes decisions in as little as 24 hours on equipment financing, with application-only decisions up to $500,000. That covers any trailer jetter and camera bundle, and most truck-mounted units.

Does the company need to be two years old?

Our primary lending partner publishes 2 years in business and a 660 credit score. Other lenders in our marketplace have programs for newer businesses, including startups, and some look at scores in the mid-500s. A newer company whose bank statements show many service calls and many deposits still has a path.

ExtraCredit Loans is a loan marketplace. We act as a broker, not a direct lender. We may be paid by a lender when a financing closes. How we get paid.

Get a decision on this equipment

Tell us about the business and the quote. About 60 seconds. Decisions in as little as 24 hours.

See My Options