Skip to content
ExtraCreditLENDING MADE SIMPLE

Duct and Sheet Metal Fabrication Equipment Financing

Duct fabrication equipment financing is an equipment loan that pays for the plasma table, roll formers, and coil line that make rectangular duct and fittings in-house, with the machines themselves as collateral, repaid in fixed monthly payments over up to 72 months. Through our lending partners, a qualified HVAC contractor can finance up to 100% of the cost, from $20,000 up, with a decision in as little as 24 hours. An $85,000 fitting shop over 60 months at 7.5% runs about $1,703 a month.

Reviewed by Josh Jones, in small business lending since 2010 · Updated

The numbers

CNC plasma table, professional class
$13,995 to $39,995
TDF or TDC flange former
$20,000 to $55,000
Coil line (automated duct line)
$130,000 to $450,000+
Share of cost financed
Up to 100%
Term
Up to 72 months
Rate
From 7.5%
Decision
As little as 24 hours
Credit score
660; mid-500s with some lenders
Time in business
2 years; startups with some lenders

Equipment prices are from The ACHR News's 2026 duct fabrication equipment guide (July 6, 2026) and Arclight Dynamics' published plasma table prices (checked November 2, 2026). Financing terms are what our primary lending partner publishes for equipment financing, checked October 12, 2026; the lower minimums are what other equipment lenders in our marketplace publish, checked November 6, 2026. Depending on the deal, your financing may be placed with one of our bank partners or with an alternative lender. Your rate depends on the amount, your credit, and the company's finances.

What duct fabrication equipment costs

The price spread is wide. The ACHR News, an HVAC trade publication, published 2026 machine prices in July, for the machine alone, before freight, duties, and installation:

Machine What it does Price range
Decoiler Feeds coil to the line $3,000 to $15,000
Pittsburgh lock former, manual Forms the long seam on rectangular duct $6,000 to $18,000
TDF or TDC flange former Forms the joint flange on duct ends $20,000 to $55,000
Elbow or gore-lock machine Seams round elbows $15,000 to $45,000
Seam or spot welder Joins fittings $12,000 to $35,000
Plasma or laser blanking table Cuts fitting patterns from sheet $30,000 to $150,000
Spiral tube former Makes round spiral duct $45,000 to $130,000
Coil line, automated duct line Beads, notches, shears, and bends duct from coil $130,000 to $450,000 and up

Published dealer and maker prices run below the low end of some of those ranges. Arclight Dynamics, a plasma table maker, lists its professional tables at $13,995 to $39,995, with the Arc Max Elite 5 x 10 at $29,995, and its Hypertherm XPR class tables from $160,995 to $172,995. Elite Metal Tools, a dealer, lists a Tin Knocker 14-station TDF or TDC roll former at $32,500, a 16 gauge Pittsburgh roll former at $7,995, and a 20 gauge Pittsburgh machine at $5,355; Sierra Victor Industries lists a new GMC PL-20E Pittsburgh machine at $4,950. The sets differ because the trade guide covers industrial lines and the dealers price single machines for small shops.

The machine is not the whole cost. The ACHR guide’s rule is to add 15 to 25 percent to the machine price for everything needed to make it produce; a coil line alone draws 20 to 40 kW and runs 45 to 50 feet. The loan covers what is on the dealer’s invoice, including freight and installation when the dealer quotes them. Electrical service, compressed air, fume extraction, software, and training are not on it, and that is where working capital financing comes in.

What the payment looks like

Take a fitting shop built from those prices: the Arc Max Elite plasma table at $29,995, the Tin Knocker TDF roll former at $32,500, and the 16 gauge Pittsburgh roll former at $7,995, which is $70,490 in machines. Add the guide’s 15 to 25 percent and the project lands at $81,000 to $88,000. Call it $85,000, financed in full at 7.5%, the published starting rate:

Term Monthly payment Total paid Interest
60 months $1,703 $102,194 $17,194
72 months $1,470 $105,815 $20,815

The longer term costs $3,622 more in interest and lowers the payment by $234 a month. Pick the term by cash flow, not by the interest total; the loan has no prepayment penalty, so you can pay the 72-month loan off on a 60-month schedule after a strong summer.

The machines earn their payment in shop hours. Arclight’s own comparison is a couple of minutes of cut time for a fitting flat pattern against a half hour of hand layout and snips. Call the saving 28 minutes a fitting; at the Bureau of Labor Statistics’ median sheet metal worker wage of $29.71 an hour (May 2025), that is about $13.86 of labor a fitting, and about 123 fittings a month cover the 60-month payment, roughly six a working day. That is an example built from the maker’s time claim and a national median wage, not a market figure for your shop.

The payment is the same in April as in July. A line of credit carries the shoulder months; the equipment loan is sized to the machines, not to the slow season.

Who qualifies

Equipment financing is the easiest product to qualify for in our marketplace, because the machines secure the loan. Our primary lending partner publishes 2 years in business, a 660 credit score, and application-only approvals up to $500,000, which covers a full fitting shop and most used coil lines. Other lenders in our marketplace have programs for newer businesses, including startups, and some look at scores in the mid-500s.

Three things decide the rate: the amount financed, the owner’s personal credit, and the company’s deposits. Lenders expect seasonality in HVAC; statements that include a peak season help, and existing truck and equipment payments count against what you can carry. Demand for the work is not the question: the Bureau of Labor Statistics projects HVAC technician jobs to grow 11% from 2025 to 2035.

Loan or lease

Buy it. Roll formers and coil lines are long-lived machines; a dealer lists a 1999 coil line, with controls updated in 2014, at $190,000 today, which says how slowly this equipment loses its value. A 72-month loan ends well inside the working life of a Pittsburgh machine, a flange former, or a coil line, and the shop owns them outright at the end. A lease gives a lower payment and a purchase option, which makes sense only for the plasma table, the one piece where software and torch technology move, if you expect to trade up in three or four years. Our primary lending partner offers leasing only when the vendor allows it.

Section 179 of the tax code may let the company deduct some or all of the cost in the year the equipment is financed. Confirm with your accountant before you count on it.

How to apply

  1. Get the dealer’s written quote on every machine, with freight and installation where the dealer provides them.
  2. Have three months of business bank statements ready, plus the owner’s ID.
  3. Tell us about the company and the quote. We match the file to the lender with the best fit.
  4. Decision in as little as 24 hours. The lender pays the dealer, and the company makes fixed monthly payments.

If the quote includes costs the equipment lender will not finance, working capital financing covers them so the line is wired and running the week it lands.

Sources

Common questions

Can the plasma table, flange former, and Pittsburgh machine go on one loan?

Yes, when they are on one dealer quote. The lender pays the dealer and the contractor makes one payment. A single Pittsburgh machine at $4,950 to $7,995 is under the $20,000 minimum on its own, so it goes in the bundle or on a term loan.

Can I finance a used coil line?

Yes. Our lending partners finance new and used equipment bought from a licensed dealer. Used lines hold their price: a dealer lists a 1999 Iowa Precision coil line with 2014 controls at $190,000. Expect a condition report and a shorter term on an older machine.

Does the loan cover installation, electrical, and training?

It covers what is on the dealer's invoice, which can include freight and installation when the dealer quotes them. Electrical service, compressed air, fume extraction, software, and training that the dealer does not sell are not on it. Working capital financing covers those so the machine is not sitting dark.

How fast can a fabrication equipment loan be approved?

Our primary lending partner publishes decisions in as little as 24 hours on equipment financing, with application-only decisions up to $500,000. That covers a plasma table, a full fitting shop, and most used coil lines without financial statements.

Should I lease fabrication equipment instead?

Usually not. Roll formers and coil lines stay in service for decades, so owning the machines at the end of the loan is worth more than a lease's lower payment. Our primary lending partner offers leasing only when the equipment vendor allows it.

ExtraCredit Loans is a loan marketplace. We act as a broker, not a direct lender. We may be paid by a lender when a financing closes. How we get paid.

Get a decision on this equipment

Tell us about the business and the quote. About 60 seconds. Decisions in as little as 24 hours.

See My Options